Product T-1 TYPE T-2 TYPE T-3 TYPE Removable Nonprogressive Panel System Thickness of Panel 50mm 50mm 50mm Max Length of Wall Panel 6000mm 6000mm 6000mm Width of Panel 900mm 900mm 900/1200mm Core Material Surfact Material T=0.6mm Powder Coated Steel Sheet T=0.6mm Powder Coated Steel Sheet T=0.6mm Powder Coated Steel Sheet T=0.6mm Antistatic Steel Sheet T=0.6mm Antistatic Steel Sheet T=0.6mm Antistatic Steel Sheet Core Material Paper/Aluminum/PU/Rock Wool Paper/Aluminum/PU/Rock Wool Paper/Aluminum/PU/Rock Wool Connection Method Type 1 Batten Type 2 Batten Type 3 Batten 　 Inner Function Cable Can Be Pre-Planted Cable Can Be Pre-Planted Cable Can Be Pre-Planted Type 1 silicone airtight panel Flush both sides with optional antistatic steel sheet, airtight silicone sealed between the panels, with load bearing capability. Thickness of panel: 50mm (12.7") Type 2 Non silicone flush finish panel Flush both sides with optional antistatic steel sheet and panel are connected by removable batten with load bearing capability. Non-progressive installation and panels can be removed individually without disjointing the tracks and adjacent panels. Thickness of panel: 50mm (12.7") Type 3 Non silicone flush finish panel (3 components) Flush both sides with antistatic steel sheet. Panels are connected by 3 components broad batten with enhanced load bearing capability. Non-progressive installation and panels can be removed individually without disjointing the tracks and adjacent panels. Type 3 Panel is cost effective. Its outlook and surface is same as T-2000 Bay Partition, therefore, it can be installed in the outer area of Bay Partition when the possibility of machine move-in is low. Thickness of panel: 50mm (12.7")